Or the “What’s that called” page.
Or the “What did they just ask me to go get” page.
(you get the idea)
Glossary of MuseumTrade Terms
There are currently 5 terms in this directory beginning with the letter S.
Screw Driver - Phillips
The tip that engages with the screw looks like a plus sign or cross. It\'s probably the screw head you\'ve seen most (at least in the United States). Phillips screwdrivers come in several standard sizes, ranging from tiny \"jeweler\'s\" to those used for automobile frame assembly—or #000 to #4 respectively. This size number is usually stamped onto the shank (shaft) or handle for identification. Each bit size fits a range of screw sizes, more or less well. Each Phillips screwdriver size also has a related shank diameter. The driver has a 57° point and tapered, unsharp (rounded) flutes. The #1 and smaller bits come to a blunt point, but the #2 and above have no point, but rather a nearly squared-off tip, making each size incompatible with the other.
The design is often criticized for its tendency to cam out at lower torque levels than other \"cross head\" designs, an effect caused by the tapered profile of the flutes which makes them easier to insert into the screw than other similar styles. There has long been a popular belief that this was actually a deliberate feature of the design. Evidence is lacking for this specific narrative and the feature is not mentioned in the original patents. However, a subsequent refinement to the original design described in US Patent #2,474,994 describes this feature.
The design is often criticized for its tendency to cam out at lower torque levels than other \"cross head\" designs, an effect caused by the tapered profile of the flutes which makes them easier to insert into the screw than other similar styles. There has long been a popular belief that this was actually a deliberate feature of the design. Evidence is lacking for this specific narrative and the feature is not mentioned in the original patents. However, a subsequent refinement to the original design described in US Patent #2,474,994 describes this feature.
Screw Driver - Standard or Slotted
Hopefully this is the head you\'ve seen the least, but it\'s still out there, for some reason. The tool used to drive a slotted screw head is called a standard, common blade, flat-blade, slot-head, straight, flat, flat-tip or \"flat-head\" screwdriver. This last usage can be confusing, because the term flat-head also describes a screw with a flat top, designed to install in a countersunk hole. Furthermore, the term implies that a screwdriver has a \"head\"; it does not. Such a flat-headed screw may have a slotted, cross, square recessed, or combination head. Before the development of the newer bit types, the flat-blade was called the \"Common-Blade\", because it was the most common one. Depending on the application, the name of this screwdriver may differ. Within the automotive/heavy electric industries, it is known as a \"flat head screwdriver\"; within the avionics and mining industries, it is known as a \"standard screwdriver\". Though there are many names, the original device from 1908 was known as a \"flat-head screw turner\".
Among slotted screwdrivers, variations at the blade or bit end involve the profile of the blade as viewed face-on (from the side of the tool). The more common type is sometimes called keystone, where the blade profile is slightly flared before tapering off at the end, which provides extra stiffness to the workface and makes it capable of withstanding more torque. To maximize access in space-restricted applications, the cabinet variant screwdriver blade sides are straight and parallel, reaching the end of the blade at a right angle. This design is also frequently used in jeweler\'s screwdrivers.
Many textbooks and vocational schools instruct mechanics to grind down the tip of the blade, which, due to the taper, increases its thickness and consequently allows more precise engagement with the slot in the screw. This approach creates a set of graduated slotted screwdrivers that fit a particular screw for a tighter engagement and reduce screw head deformation. However, many better-quality screwdriver blades are already induction-hardened (surface heat-treated), and tip grinding after manufacture compromises their durability. Thus, it is best to select a tip made to fit precisely to begin with, and avoid weakening the factory heat-treatment.
Submitted by: Matt IsbleAmong slotted screwdrivers, variations at the blade or bit end involve the profile of the blade as viewed face-on (from the side of the tool). The more common type is sometimes called keystone, where the blade profile is slightly flared before tapering off at the end, which provides extra stiffness to the workface and makes it capable of withstanding more torque. To maximize access in space-restricted applications, the cabinet variant screwdriver blade sides are straight and parallel, reaching the end of the blade at a right angle. This design is also frequently used in jeweler\'s screwdrivers.
Many textbooks and vocational schools instruct mechanics to grind down the tip of the blade, which, due to the taper, increases its thickness and consequently allows more precise engagement with the slot in the screw. This approach creates a set of graduated slotted screwdrivers that fit a particular screw for a tighter engagement and reduce screw head deformation. However, many better-quality screwdriver blades are already induction-hardened (surface heat-treated), and tip grinding after manufacture compromises their durability. Thus, it is best to select a tip made to fit precisely to begin with, and avoid weakening the factory heat-treatment.
Screwdriver - Square, Robertson, or Scrulox
These heads engage very well with the bit and slip less than Phillips and Slotted screwdrivers. What I love them for is their small heads (also a reason to not use them). They are great for securing mounts to walls or decks and situations like that, when you want a minimal profile.
Robertson, also known as a square, or Scrulox screw drive has a square-shaped socket in the screw head and a square protrusion on the tool. Both the tool and the socket have a taper, which makes inserting the tool easier, and also tends to help keep the screw on the tool tip without the user needing to hold it there. (The taper's earliest reason for being was to make the manufacture of the screws practical using cold forming of the heads, but its other advantages helped popularize the drive.) Robertson screws are commonplace in Canada, though they have been used elsewhere, and have become much more common in other countries in recent decades. Robertson screwdrivers are easy to use one-handed, because the tapered socket tends to retain the screw, even if it is shaken. They also allow for the use of angled screw drivers and trim head screws. The socket-headed Robertson screws are self-centering, reduce cam out, stop a power tool when set, and can be removed if painted over or old and rusty. In industry, they speed up production and reduce product damage. One of their first major industrial uses was the Ford Motor Company's Model A & Model T production. Henry Ford found them highly reliable and saved considerable production time, but he couldn't secure licensing for them in the United States, so he limited their use solely to his Canadian division. Robertson-head screwdrivers are available in a standard range of tip sizes, from 1.77mm to 4.85mm.
Submitted by: Matt IsbleRobertson, also known as a square, or Scrulox screw drive has a square-shaped socket in the screw head and a square protrusion on the tool. Both the tool and the socket have a taper, which makes inserting the tool easier, and also tends to help keep the screw on the tool tip without the user needing to hold it there. (The taper's earliest reason for being was to make the manufacture of the screws practical using cold forming of the heads, but its other advantages helped popularize the drive.) Robertson screws are commonplace in Canada, though they have been used elsewhere, and have become much more common in other countries in recent decades. Robertson screwdrivers are easy to use one-handed, because the tapered socket tends to retain the screw, even if it is shaken. They also allow for the use of angled screw drivers and trim head screws. The socket-headed Robertson screws are self-centering, reduce cam out, stop a power tool when set, and can be removed if painted over or old and rusty. In industry, they speed up production and reduce product damage. One of their first major industrial uses was the Ford Motor Company's Model A & Model T production. Henry Ford found them highly reliable and saved considerable production time, but he couldn't secure licensing for them in the United States, so he limited their use solely to his Canadian division. Robertson-head screwdrivers are available in a standard range of tip sizes, from 1.77mm to 4.85mm.
Submit a term
Do you have an addition or clarification to the terms? I’d love to have your input, there’s too much for one person to record, I need your help! Write me with your suggestions: Contact Form